Télécharger Imprimer la page

AEG HGB64420YM Notice D'utilisation page 9

Publicité

Les langues disponibles

Les langues disponibles

• This appliance is supplied with a
mains cable and a plug.
• Always use a correctly installed
shockproof socket.
• Make sure that there is an access to
the mains plug after the installation.
• Do not pull the mains cable to
disconnect the appliance. Always pull
the mains plug.
• There is a risk of fire when the
appliance is in connection with an
extension cable, an adapter or a
multiple connection. Make sure that
the ground connection agrees with the
standards and regulations.
• Do not let the power cable to heat up
to a temperature higher than 90° C.
Make sure that you connect
the blue neutral cable to the
terminal with a letter "N" on
it. Connect the brown (or
black) phase cable to the
terminal which has a letter
"L". Keep the phase cable
connected at all times.
3.5 Connection cable
To replace the connection cable use only
the special cable or its equivalent. The
cable type is: H05V2V2-F T90.
Make sure that the cable section is
applicable to the voltage and the working
temperature. The yellow / green earth
wire must be approximately 2 cm longer
than the brown (or black) phase wire.
3.6 Assembly
1.
2.
3.
min.
100 mm
min.
55 mm
30 mm
2
+
480 mm
0
4.
5.
6.
B
A. Supplied seal
B. Supplied bracket
ENGLISH
9
min.
650 mm
+
2
560 mm
0
A

Publicité

loading