Publicité
ENGINE REMOVAL
Extent of removal:
Extent of removal
Preparation for removal
1 Engine removal
Order
Part name
ENGINE REMOVAL
Hold the machine by placing the
suitable stand under the frame.
Seat, fuel tank and side covers
Carburetor
Muffler
Clutch cable
Spark plug cap
Disconnect the CDI magneto
lead.
Disconnect the neutral switch lead
for the TT-R125E/TT-R125LWE.
Starter motor for the TT-R125E/
TT-R125LWE
Drain the engine oil.
ENGINE REMOVAL
Q'ty
Refer to "SEAT, FUEL TANK AND SIDE
COVERS" section.
Refer to "CARBURETOR" section.
Refer to "MUFFLER" section.
Disconnect at engine side.
Refer to "ELECTRIC STARTING SYS-
TEM" section in the CHAPTER 6 for the
TT-R125E/TT-R125LWE.
Refer to "ENGINE OIL REPLACEMENT"
section in the CHAPTER 3.
4 - 66
ENG
Remarks
Publicité
