Publicité
Les langues disponibles
Les langues disponibles
1. Install fixed glass panel (L) and door panel (G) with the 2 hinges (K). Use a ratchet to strongly tighten the
bolts.
2. Insert the door panel's bottom seal strip (C) into the door panel (G).
3. Insert the 2 magnetic door seal strips (F) on the door panel (G) and the track (Z).
Note: The wall tracks (B) allow you to adjust the position of the fixed glass panel (L). Adjusting the
depth and/or giving the fixed panel a slight angle allows for precise alignment with the door.
4-6. Mark the position and the holes of the track (Z). Drill the holes with Φ 6mm (1/4in) drill bit.
7-8. Insert the wall anthors (FF) to the wall and secure the track with fittings (JJ), screws (DD) and caps (II).
L
K
3
G
Z
F
5
7
II
JJ
DD
FF
Z
DOOR PANEL INSTALLATION
1
L
KK
K
G
KK
11
2
G
C
4
G
Z
6
Φ 6mm
1/4in
8
Z
G
F
Publicité
