Systainer - Festool HL 850 E Guide D'utilisation

The blades on the rustic planing head (HK 82 RF,
HK 82 RG, HK 82 RW) protrude approx. 1⁄16" (1.5 mm
)over the planer foot. When using rustic planing
heads on the planer, set the cutting depth to 0. Oth-
erwise there is a risk that the blades on the head
will cut into the planer foot and destroy the planer.
The cutting depth limiter (11.2) prevents the cutting
depth from increasing inadvertently while planing
work is performed.
Always attach the cutting depth limiter to the planer
before working with a rustic planing head:
- Set the cutting depth on the planer to 0,
Many Festool products are shipped in a unique
system container, called "Systainer". This provides
protection and storage for the tool and accessories.
The Systainers are stackable and can be interlocked
together. They also can be interlocked atop Festool
CT dust extractors.
To open the Systainer:
• Turn the T-loc (12.1) to the position
To lock the Systainer:
• Turn the T-loc (12.1) to the position
To connect two Systainers:
• Place one Systainer on the top of the other (Fig.
12 A).
• Turn the T-loc (12.1) to the position
(Fig. 12 B).
The Systainers are connected and locked.
f A new generation Systainer is connectable on
top of a previous generation Systainer by the four
latches of the previous Systainer.
10
- Attach the cutting depth limiter by inserting the
rotary knob (11.1) through the limiter and into the
threaded hole (11.3).
11.1

Systainer

.
.
A
or
B 12.1
11.3
11.2
12