Publicité
Les langues disponibles
Les langues disponibles
Installation
3.4.Electrical
connection
WARNING:
A
connections via extension
cables or multi-plugs.
WARNING:
B
cable must be replaced by the
Authorized Service Agent.
If two coolers are to be
installed side by side, there
C
should be at least 1 5/8"
(4 cm ) distance between
them.
• Our company shall not be liable
for any damages that will arise
when the product is used
without grounding and electrical
connection in accordance with the
national regulations.
• Power cable plug must be within
easy reach after installation.
• Do not extension cords or cordless
multiple outlets between your
product and the wall outlet.
Hot Surface Warning!
Side walls of your product is
equipped with refrigerant
pipes to improve the cooling
system. Refrigerant with
high temperatures may
C
flow through these areas,
resulting in hot surfaces
on the side walls. This is
normal and does not need
any servicing. Please pay
attention while touching
these areas.
Freezer / User Manual
Do not make
Damaged power
11 / 20 EN
3.5. Connecting
the water hose
to the freezer
1. Remove the valve channel cover
(A) from the water inlet valve.
2. Connect the water line (C) to the
inlet valve (B) and tighten by hand
to secure it. It is not necessary to
use pliers, but if there is a leak, you
may tighten slightly with a pair of
pliers.
Publicité
