Ergomotion Rio 5.0 Manuel De L'utilisateur page 13

Remote control
PRESET PROGRAMMING
STEP 1
Articulate the head and foot to your desired position.
STEP 2
Press and hold one of the preset buttons [
position is now saved.
NOTE: To restore the preset buttons back to their original factory
settings, hold FLAT and ZERO-G® simultaneously for at least 5 seconds.
The original presets will be restored.
• • •
] for 7 seconds. The
K
CHILD LOCK
ACTIVATE CHILD LOCK:
Press and hold FLAT and HEAD UP buttons
for 3 seconds. When the backlight on the
remote flashes 2 times, that means the lock
is completed.
When a button is pressed in Child Lock
mode, the backlight on the remote will flash
twice.
DEACTIVATE CHILD LOCK:
Press and hold FLAT and FOOT UP buttons
for 3 seconds. When the backlight on the
remote flashes 2 times, that means the
unlock is completed.
The remote will now operate normally.
11