Publicité
Les langues disponibles
Les langues disponibles
Pairing remote control
The original remote that comes in the box is already paired to the adjustable base. No further action is required. In the
event that the remote is not paired with the base, follow the steps below.
STEP 1
Unplug the Power Cord from your power outlet. Wait 1 minute, then plug it back
in to your power outlet. Perform Step 2 within 10 seconds, while the control box
light is flashing.
12
STEP 2
Remove the cover on the back of the remote and
hold the PAIR button. The PAIR button will illuminate
and start to flash. When the PAIR button stops
flashing, the pairing LED light on the control box will
stop illuminating. Release the PAIR button on the
remote.
STEP 3
Test all remote functions. If the remote buttons do not impact the adjustable base
movements, please repeat the process again or call Ergomotion customer service:
1-888-550-3746
PAIR
button
Publicité
