Additional Safety Instructions - Evolution R225DWS Notice Originale

www.evolutionpowertools.com
unfamiliar with the power tool or these
Instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
e) Maintain power tools. Check for
misalignment or binding of moving parts,
breakage of moving parts and any other
condition that may affect the power tools
operation. If damaged, have the power
tool repaired before use. Many accidents are
caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control.
g) Use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to
be performed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.
(2.6) 5) General Power Tool Safety
Warnings [Service]
a) Have your power tool serviced by
a qualified repair person using only
identical replacement parts. This will ensure
that the safety of the power tool is maintained.
HEALTH ADVICE
(2.7)
WARNING: When using this machine, dust
particles may be produced. In some instances,
depending on the materials you are working
with, this dust can be particularly harmful.
If you suspect that paint on the surface
of material you wish to cut contains lead,
seek professional advice. Lead based paints
should only be removed by a professional
and you should not attempt to remove it
yourself. Once the dust has been deposited
on surfaces, hand to mouth contact can result
in the ingestion of lead. Exposure to even
low levels of lead can cause irreversible brain
and nervous system damage. The young and
unborn children are particularly vulnerable.
You are advised to consider the risks
associated with the materials you are working
with and to reduce the risk of exposure. As
some materials can produce dust that may be
hazardous to your health, we recommend the
use of an approved face mask with replaceable
filters when using this machine.
You should always:
• Work in a well-ventilated area.
• Work with approved safety equipment,
such as dust masks that are specially
designed to filter microscopic particles.
(2.8) WARNING: the operation of any power
tool can result in foreign objects being thrown
towards your eyes, which could result in
severe eye damage. Before beginning power
tool operation, always wear safety goggles or
safety glasses with side shields or a full face
shield where necessary.

ADDITIONAL SAFETY INSTRUCTIONS

WARNING: Read completely all safety
instructions. Failure to follow these
instructions could result in serious personal
injury. Pass these instructions on to any other
operators and ensure that they are adequately
trained in the use and adjustment of this
machine.
• Read the Instruction Manual completely
and carefully. Learn the applications and
limitations, as well as the specific potential
hazards relating to the use of this machine.
Pass this manual on to any other operator(s)
who may use this machine.
• Wear safety glasses or a face shield when
operating this machine. Everyday spectacles
do not have impact resistant lenses and
therefore cannot be regarded as safety
glasses.
• Protect your lungs. Wear a dust mask that
is capable of filtering microscopic dust
particles.
• Wear close fitting work clothing, and
remove any dangling jewellery, chains or
belts etc that could become entangled in
rotating machinery.
• Protect your hearing. Wear suitable ear
defenders.
• Inspect the machines power cord regularly,
and if it is damaged in any way have the
cord replaced with a genuine replacement
part fitted by a qualified technician.
• Check for any other damage. Any damage
found must be repaired before the machine
7
EN