Publicité
Les langues disponibles
Les langues disponibles
reMoVinG And rePlAcinG the oVen door
How to remove the door
• The door is very heavy. Be careful when removing and lifting the door. Do not lift the
cAution
• Turn the power OFF before removing the door.
1. Open the door completely.
2. Pull the hinge locks down toward the door frame to the unlocked position.
3. Firmly grasp both sides of the door at the top.
4. Close the door to the door removal position, which is approximately 5 degrees from vertical
(Fig. 1).
5. Lift door up and out until the hinge arm is clear of the slot (Fig. 2).
Fig. 1
How to replace the door
1. Firmly grasp both sides of the door at the top.
2. With the door at the same angle as the removal position, slide the indentation of the hinge arm
into the bottom edge of the hinge slot. The notch in the hinge arm must be fully inserted into
the bottom of the slot.
Bottom
edge of slot
51_ Maintaining your appliance
NE595R0ABSR_AC_DG68-00425A-05_EN.indd 51
All manuals and user guides at all-guidesbox.com
door by the handle.
Hinge lock
Locked position
about 5 °
Indentation
Unlocked position
Fig. 2
Hinge arm
2015-02-27
4:37:15
Publicité
