Yamaha DME8i-C Mode D'emploi page 44

Références
<DME4io-C>
Input
INPUT 1–4
Total Harmonic Distortion
<DME8i-C/DME4io-C>
Input
<DME8i-C>
INPUT 1–8
<DME4io-C>
INPUT 1–4
<DME8o-C>
Input
INPUT 1–8
Hum&Noise
<DME8i-C>
Input
INPUT 1–8
<DME8o-C>
Input
INPUT 1–8
44
DME8i-C/DME8o-C/DME4io-C Mode d'emploi
Output RL
OUTPUT 1–4 600Ω
fs=48kHz or 96kHz
Output RL
OUTPUT 1–8 600Ω
Output RL
OUTPUT 1–8 600Ω
* Total Harmonic Distortion is measured with a 18dB/octave filter @80kHz.
fs=48kHz or 96kHz, EIN=Equivalent Input Noise
Output RL
OUTPUT 1–8 600Ω
Output RL
OUTPUT 1–8 600Ω
CONDITIONS
input level: –60dBu, GAIN: –60dB
input level: +10dBu, GAIN: +10dB
CONDITIONS
+4dB@20Hz–20kHz (fs=48kHz),
20Hz–40kHz (fs=96kHz), GAIN: –60dB
+4dB@20Hz–20kHz (fs=48kHz),
20Hz–40kHz (fs=96kHz), GAIN: +10dB
+22dB@1kHz, GAIN: +10dB (fs=48kHz)
+22dB@1kHz, GAIN: +10dB (fs=96kHz)
CONDITIONS
+4dB@20Hz–20kHz (fs=48kHz),
20Hz–40kHz (fs=96kHz), GAIN: +10dB
+22dB@1kHz, GAIN: +10dB (fs=48kHz)
+22dB@1kHz, GAIN: +10dB (fs=96kHz)
CONDITIONS
Rs=150Ω, GAIN: –60dB
All input & output level controls: 0dB
Rs=150Ω, GAIN: +10dB
All input & output level controls: 0dB
CONDITIONS
Rs=150Ω, GAIN: +10dB
All input & output level controls: 0dB
MIN TYP MAX UNITS
+2.0 +4.0 +6.0 dBu
+2.0 +4.0 +6.0 dBu
MIN TYP MAX UNITS
0.1 %
0.05 %
0.015 %
0.007 %
MIN TYP MAX UNITS
0.05 %
0.015 %
0.007 %
MIN TYP MAX UNITS
–128 –127
dBu
EIN EIN
–64 dBu
–82 –79 dBu
MIN TYP MAX UNITS
–82 –79 dBu