Using The Device And Preparing Food - DS Produkte 04422 Mode D'emploi

Using the Device and Preparing Food

PLEASE NOTE!
■ The drawer and the basket insert are hot after being removed from the device! Only
ever put them down on a heat-resistant surface!
■ Make sure that the drawer has been inserted correctly! The device cannot be switched
on if the drawer is not inserted correctly.
■ Insert the drawer into the device only with the basket insert placed in it.
■ Do not overfi ll the basket insert so that the hot air can circulate optimally inside the
device. Fill the basket insert no more than 2/3 full!
■ Do not place food that is still packed in plastic wrap or plastic bags in the device.
■ Make sure that the food that you would like to prepare does not come into contact
with the heating element of the device.
This device works with hot air. It is not a conventional fryer in which food is
deep-fried using lots of oil! In general, you can prepare all dishes that can
also be prepared in a conventional fan oven. For good results, read through
the "Tips" chapter.
1. Insert the basket insert (6) into the drawer (10). It must engage audibly.
2. Pour the food that is to be prepared into the basket insert.
3. Insert the drawer containing the basket insert into the device. A beep must sound and
a ll elements must light up once on the display (23) and on the LED display (5) and
then go out again. The drawer is then fi tted correctly in the device.
4. Switch on the device by touching the fi eld
tion of the "Manual" programme are displayed alternately on the LED display.
5. Use the fi eld
programme (see the "Operation" chapter – "Operating Elements and Functions"). If
necessary, adjust the temperature and the timer time individually using the relevant +
and – fi elds (see the "Operation" chapter – "Operating Elements and Functions").
6. Start the selected programme by touching the fi eld
bol (24) appear on the display to indicate that the device is heating up.
The temperature and the timer time can also be adjusted during the cooking
process.
Please Note: The symbol
is not a malfunction. To maintain a constant temperature, the device heats up or the
device stops the heating process at regular intervals. When the symbol
the device is in a heating phrase, and when the symbol
heat has been briefl y interrupted.
7. Once the set timer time has elapsed, the supply of heat is ended automatically.
All elements go out, except for the symbol
By touching the fi eld
aborted at any time.
Please Note: After the set timer time has elapsed or the device is switched off man-
ually, the fan initially continues to operate! The symbol
display. After approximately 30 seconds the fan and the device switch off completely.
The symbol
04422_Inlay_DE-EN-FR-NL_A5_V1.indb 25 04422_Inlay_DE-EN-FR-NL_A5_V1.indb 25
25
(20) to select the programme you want or stay on the preset "Manual"
goes out and appears again at regular intervals. This
during the cooking process, it can be manually
goes out.
(21). The preset temperature and dura-
. The symbol
goes out, the supply of
.
remains visible on the
EN
(16) and sym-
appears,
27.12.2019 09:39:05 27.12.2019 09:39:05