Télécharger Imprimer la page

Whirlpool GU3200XTXQ3 Instructions D'installation page 15

Publicité

Les langues disponibles

Les langues disponibles

Insert plastic buttons
plastic
button
Push the plastic buttons out of the side of the tub.
NOTE: Save the buttons to cover the holes after
dishwasher is installed.
Move
dishwasher close to
cabinet opening
Push bracket into slot on the side of dishwasher, and
bend tab in toward the side of the dishwasher so that it
keeps the bracket in place. Repeat this step for the other
side of the dishwasher.
NOTE:
Do not attach the dishwasher. This will be done
later.
Move Dishwasher
into Cabinet
Opening
AWARNING
Excessive Weight Hazard
Use two or more people to move and install
dishwasher.
Failure to do so can result in back or other injury.
1 | Stand dishwasher upright
Using two or more people, stand dishwasher upright.
NOTE: Do not install kick plate until instructed to do so.
IMPORTANT:
Double-check correct placement of utilities.
Grasp the sides of the dishwasher at the edges of the
door panel. Tilt dishwasher backward on wheels and
move dishwasher close to cabinet opening.
NOTE: Do not push on the front of the panel or on the
console. Panel or console may dent.
Helpful Tip: Temporarily tape utilities to the floor in the
locations shown to keep them from moving when
dishwasher is moved into the cabinet opening.
Check water and drain
hose position
Check that water line is on the left side of opening and
drain hose is near the center of the cabinet opening.
With another person holding the dishwasher to keep it
from tipping, open and close the door a few times. If the
door closes or falls open under its own weight, the door
tension will need to be adjusted.
15

Publicité

loading

Ce manuel est également adapté pour:

Gu3000xtxb3