Publicité
A
B
1
2
3
4
4
6
33
Threading
Left needle (Yellow)
- Place the spool on the
spool holder pin.
- Bring thread up through guide (1).
- Pull the thread under the
protector (2) and pass under the
guider up to go around the
pre-tension (3).
- Thread guide (4,5).
- Thread left needle eye (6)
- Place thread under presser foot.
After threading
When threading is complete, lower
5
the presser foot and close the
looper cover and cloth plate.
Note:
If the lower looper has to be
re-threaded, cut both needle
threads off at the needle eye
and remove surplus thread from
below. Thread the looper and then
re-thread the needles.
Publicité
