Publicité
Les langues disponibles
Les langues disponibles
PRE-INSTALLATION CHECKLIST
1. When preparing cooktop opening, make sure
the inside of the cabinet and the cooktop do
not interfere with each other. (See section on
preparing the opening.)
2. Slide the cooktop out of the end of the box.
Remove packaging materials, grate boxes,
regulator and literature package from the
cooktop before beginning installation.
• Use the shipping carton as a pad to protect
customer countertops or flooring.
Foam support
Left and right side
grate boxes
Regulator
Center
taped to the
grate box
underside
Installation Preparation
3. Remove Installation Instructions from literature
4. Make sure you have all the tools and materials
5. Your home must provide the adequate electrical
6. When installing your cooktop in your home, make
7. Make sure the wall coverings, countertop and
Foam
packaging
6
package and read them carefully before you
begin.
Be sure to place all literature, Owner's Manual,
Installations, etc. in a safe place for future
reference.
you need before starting the installation of the
cooktop.
service needed to safely and properly use your
cooktop. (Refer to section on electrical
requirements.)
sure all local codes and ordinances are followed
exactly as stated.
cabinets around the cooktop can withstand heat
(up to 200°F) generated by the cooktop.
Publicité
