Télécharger Imprimer la page

Bartscher A114.001 Mode D'emploi page 24

Publicité

Les langues disponibles
  • FR

Les langues disponibles

6. Cleaning and care
6.1 Safety advice
o Before beginning with repair or cleaning works make sure the device has been
disconnected from power socket (pull the power plug!!!) and has cooled down.
o Do not use any acid agents and make sure no water ingresses the device.
o To protect yourself from electric shock, never immerse the device, its cables and the
plug in water or other liquids.
CAUTION!
The device is not suited for direct washing via water jets. Therefore, you must not
use any kind of pressure water jet for cleaning the device!
6.2 Cleaning
o The device should be cleaned regularly.
o After each use, clean the GN container and the perforated dish with a soft cloth and
a mild detergent.
o Clean the casing of the device with a damp, soft cloth and a mild detergent.
o Use soft cloth only and make sure you never use any kind of abrasive agents, which
could scratch the surface.
o After the cleaning procedure you should use a soft and dry cloth to wipe dry and
polish the surface.
o Make sure the device has been cleaned properly before storing it in a dry place.
6.3 Safety instructions for maintenance
o Check the mains connection cable for damage from time to time. Never operate the
device when the cable is damaged. A damaged cable must immediately be replaced
by customer service or a qualified electrician to avoid dangers.
o In case of damage or malfunction, please contact your stockist or our customer
service centre.
o Only a qualified technician and using original spare parts and accessories should
carry out repairs and maintenance of the device. Do not attempt to repair the
device yourself.
- 23 -

Publicité

loading