Publicité
Les langues disponibles
Les langues disponibles
Operating panel
Control light for
the top lamp
5. Installation and operation
5.1 Safety instructions
WARNING! Electrical hazard!
The device must only be connected to a properly installed single socket with
protective contact.
Never yank cord to disconnect from outlet.
Cable must not touch any hot parts.
•
See that the cable does not touch any heat sources or sharp edges. Do not let the
cable dangle over the counter edge.
WARNING! Hot surface!
During operation some elements of the device very become hot. To avoid burns,
do not touch hot elements!
•
Do not use the device if it does not function properly, has been damaged or dropped.
•
Do not use any accessory or spare parts that have not been recommended by the
manufacturer. These can be dangerous for the user, or lead to damage of the device or
personal injury, and furthermore invalidate the warranty.
•
Do not lay the cable over carpets or heat insulations. Do not cover the cable. Keep the
cable away from operating range and do not dunk it into water.
•
Do not move or tilt the device during operation.
- 20 -
Switch for
top lamp
Heater
control lamp
Heater switch
Publicité
