Sony WRT-847A Mode D'emploi page 11

D BATT (battery) indication
Shows the battery condition.
See "Battery indication" on page 7.
E CH (channel) indication
Displays the transmitting channel.
Each time you press the SET button in Transmitting mode,
the channel indication changes as follows.
Transmitting
channel
Transmitting
frequency
Audio gain level
Accumulated
battery use time
Compander time
constant
Display of the transmitting channel/frequency
shows that of the CE62 model as an example.
Transmitting channel: The current transmitting channel
setting.
Transmitting frequency: The current transmitting
frequency setting.
Audio gain level: The input gain level setting in decibels.
Can be set within a range of –12 dB to +9 dB in 3-dB
steps.
Accumulated battery use time: The accumulated time of
battery use (in 1-minute increments).
Compander time constant: " L" means the long time.
" S" means the short time.
To adjust these parameters, see "Settings" from page 8 to
12.
3 SET button
In Transmit mode, press this button to change the indicated
Press SET
items in the lower half of the LCD display.
button.
To change the settings on each item, set the transmitter in
the Setting mode as follows: Turn the POWER switch to
ON while holding the SET button down. Then press the
SET button to select the items to be changed, and press the
+/– buttons to change the settings.
For details on Setting mode, see "Settings" on page 8.
5
(GB)