Tineco FLOOR ONE S7 COMBO Serie Mode D'emploi page 22

Brush Roller
Remove the brush roller by grabbing the
brush roller tab and pulling out.
Remove hair and debris from the brush roller
chamber and the opening with the cleaning
tool.
Note:
• A spare brush roller is provided with your appliance for convenient replacement.
• To maintain optimal performance, replace the brush roller every 8 months.
Dustbin
Press the release button on the side of the
dustbin to empty the contents.
Using the cleaning tool, remove the hair and
debris wrapped around the roller and rinse with
water. Replace the brush roller back into the
accessory holder, and allow it to dry completely
before reinstalling.
Replace the brush roller by inserting its end into
the left side of the holder, then attach the roller
tab to the magnetic buckle on the right side to
lock into place.
Close and click the dustbin flap back into place.
20