Publicité
Les langues disponibles
Les langues disponibles
Load Regulation:
Line Regulation:
Ripple & Noise:
(20MHz bandwidth)
Transient Load Response:
Temperature Coefficient:
Status Indication:
METER SPECIFICATIONS (Main Outputs)
Meter Types:
Meter Resolutions:
Meter Accuracies:
AUXILIARY LOGIC OUTPUT (EL302RT only)
Voltage:
Meter Voltage Accuracy:
Current Limit:
Output Protection:
Ripple & Noise
(20MHz bandwidth):
Load Regulation:
Line Regulation:
Status Indication:
GENERAL
AC Input:
Power Consumption:
Operating Range:
Storage Range:
Environmental:
Safety & EMC:
Size:
Weight:
<0.01% of maximum output for 90% load change, using remote sense.
<0.01% of maximum output for 10% line change.
Typically <1mVrms, constant voltage mode.
<20µs to within 50mV of set level for 5% to 95% load change.
Typically <100ppm/°C.
Output on lamp. Constant current mode lamp.
Dual 4 digit meters with 14mm (0.56") LEDs. Reading rate 4 Hz.
10mV, 1mA.
Voltage 0.3% of reading ± 3 digits.
Current 0.5% of reading ± 3 digits.
Variable <1.5V to >5V by front panel control.
0.3% ± 4 digits.
2A minimum.
Output will withstand up to 7V forward voltage. Diode clamp reverse
protection for currents up to 3A.
Typically <5mVrms, <15mVpk-pk (CV mode).
<3% for 90% load change.
<0.2% for 10% line voltage change.
UNREG lamp.
230V AC or 115VAC ± 10%, 50/60Hz. Installation Category II.
EL301R:
EL302R/EL183R/EL561R:
EL155R/EL303R:
EL302RD/EL302RT:
+5ºC to +40ºC, 20% to 80% RH.
−40ºC to + 70ºC.
Indoor use at altitudes up to 2000m, Pollution Degree 2.
Complies with EN61010-1 & EN3126-1.
For details, download the EU Declaration of Conformity for this
instrument from
http://www.aimtti.com/support
Singles:
140 x 160 x 295 mm (WxHxD).
Dual & Triple: 260 x 160 x 295 mm (WxHxD).
EL301R:
EL302R/EL183R/EL561R:
EL155R/EL303R:
EL302RD/EL302RT:
85VA max;
160VA max;
275VA max;
320VA max.
(serial no. needed).
3.1kg;
4.1kg;
4.5kg;
7.4kg.
3
Publicité
