3.4
Releasing and removing the removable container
Stop the vacuum motors by pressing the relevant
Warning!
Disconnect the plug from the power socket.
Caution!
Collection container release and withdrawal must only be executed in non-classified
atmosphere, which means in an area with non potentially explosive atmosphere.
➢
If the vacuum cleaner is equipped with a pressure balance kit, disconnect the hose of the
pressure balance kit before operating on the release lever.
Lift the safety lock and the container release lever to release and remove the container.
➢
Remove the container.
➢
Empty the contents of the container into a special waste disposal container in accordance with
laws applicable in the country where the vacuum cleaner is used.
Warning!
While performing these operations, it is best to wear a dust protection mask.
To prevent having to use a dust protection mask and for greater convenience, before starting
vacuuming operations, it is best to fit a nylon bag inside the container and to fasten this in place
with the special accessory available on request.
STOP
buttons.
- 24 -EN
Operation Section