Dismantling The Machine; Demolishing The Machine; Disposing Of Harmful Substances - OEM FX Série Mode D'emploi Et D'entretien

Chapter 7

7.1 - DISMANTLING THE MACHINE

Proceed by complying with the instructions given in the
"Installation" chapter, working in reverse order, if the
machine must be dismantled and then moved to another
site.
DANGER
Before disassembling the machine or demounting
some machine components, disconnect the power
supply.
The machine assembling shall only be carried out
by skilled and authorized personnel.
ATTENTION
In case it is necessary to disassemble the machine
or demount some machine components in a different
way in comparison with the written instructions,
Company manufacturer or its Agent shall be
contacted - see addresses on the third page of this
publication.

7.2 - DEMOLISHING THE MACHINE

To protect the environment, please
proceed in compliance with the local
laws in force.
When the machine can no longer be
used or repaired, please proceed with
recycle and disposal.
Electrical equipment cannot be disposed of as
ordinary urban waste: it must be disposed of
according to the special EU directive for the recycling
of electric and electronic equipment.
OEM electrical equipment is marked with a pictogram
of a garbage can inside a barred circle. This symbol
means that the equipment was sold on the market
after August 13, 2005, and must be disposed of
accordingly.
Due to the substances and materials it contains,
inappropriate or illegal disposal of this equipment, or
improper use of the same, can be harmful to humans
and the environment. Improper disposal of electric
equipment that fails to respect the laws in force will
be subject to administrative fines and penal sanctions.
GB - 22
Dismantling - Demolition - Disposal
ATTENTION
Consult the next paragraph when disposing of
harmful materials (lubricants, solvents, coating
products, etc.).

7.3 - DISPOSING OF HARMFUL SUBSTANCES

Consult the provisions established by the Standards in
force in each individual country before disposing of such
substances.
ATTENTION
Any improper use by the Customer before, during
or after scrapping and disposing of the parts of the
machine, in respect of the construction and
application of the applicable regulations, shall be
the customer's responsibility.
FX / RVE