Container Removal; Malfunctioning, Causes And Remedies - OEM FX Série Mode D'emploi Et D'entretien

FX / RVE
Functioning
5.2.e - Container removal (For models equipped with)
• Stop the machine and lift the head as indicated in the
relevant paragraph.
• Release the container (1) by turning the coupling disk
(2) counterclockwise.
• One or two persons (depending on the weight) shall
lift the container and remove it.
• To mount the container (1) again, the three pins (3)
placed on the container bottom shall be inserted in
their relevant seats (4) being on the coupling disk (2).
• Fix the container by turning the coupling disk (2)
counterclockwise.
• Lower the head as indicated in the relevant paragraph.
DANGER
Always properly position the container before
running the machine.
5.3 - MALFUNCTIONING, CAUSES AND
REMEDIES
- The machine doesn't start:
• check the electric connection.
• make sure that no foreign bodies are inside the
machine and stop the rotation.
• make sure the timer knob is on "
counter position.
• make sure both grid and head are properly lowered
and the head fixing knobs are tightened.
" or on the minute
FIG. 4
1
4
2
1
3
1
2
GB - 19