Operator Areas - OEM FX Série Mode D'emploi Et D'entretien

FX / RVE
Safety devices
4.3 - SAFETY DEVICE (Fig. 2)
The machine is provided with following safety systems:
1) All danger areas are protected by safety guards with
screws.
2) In models with fixed head, the machine is equipped
with a microswitch, which stops the spiral element
functioning, when the protection grid (1) shall be lifted;
in case of models with tip-up head, there is a grid
microswitch and also another microswitch, which
stops the spiral element functioning, when the head
(2) is lifted.
3) If by enabling one of the two safety microswitches the
machine stops, you shall press "
depending on the concerned model, to restart the
machine.
4.4 - OPERATOR AREAS (Fig. 3)
During the machine functioning, the user is in front of it,
so that he is able to easily insert/remove the dough in/
from the container;
allowed positions: see Fig 3 positions (O).
To maintain the machine, the technician can place
himself on the rear part of the machine - position (T).
4.5 - RESIDUAL DANGER AREAS (Fig. 3)
There are no remaining danger areas.
FIG. 2
" or " " again,
FIG. 3
2
1
T
O
GB - 15