Heath Zenith 4395 Mode D'emploi page 2

LANTERN ASSEMBLY
1. Place glass fixture onto base assembly.
2. Line up the arrow on the bottom of glass fixture
with the arrow on the fixture base (see illustration
below).
Glass Fixture
3. Gently push the two pieces together and rotate the
glass fixture 90° as shown below.
Glass Fixture
Fixture Base
All manuals and user guides at all-guides.com
Arrows
Fixture Base
2
INSTALLATION
For best performance, mount the fixture about 6 feet (1.8
m) above the ground.
1. Remove two decorative nuts.
2. Remove X-Bar.
3. Tighten mounting screws on X-Bar finger tight.
4. Attach X-Bar to junction box.
Decorative Nut
X-Bar
Bracket Mounting
Screw
Note: We recommend having an assistant help hold the
lantern assembly during the wiring process.
Lantern
X-Bar
Lantern Mounting
Screw
Junction Box
204069-01