Publicité
Les langues disponibles
Les langues disponibles
Before requesting service on your Verilux lamp, please read the following:
• Make sure all power connectors, cords and plugs are inserted fully and securely.
• Be sure the bulb is securely seated in the socket. (See pages 8 and 9.)
• Make sure there is power to the wall outlet or try another outlet – one that is not
connected to a dimmer.
PROBLEM
Has the plug come
loose?
Light Won't
Is the bulb old?
Come On
Is the bulb connected
securely into socket?
Is the bulb new?
Blackening/Darkening
Is the bulb old?
at Ends of Bulb
Has the plug come
loose?
Is the bulb connected
Light Flickers
securely to the socket?
Is the lamp connected
to a dimmer switch?
Your Verilux lamp is made from high-quality materials that will last for many
years with a minimum of care.
WARNING:
lamp, make sure you have turned off and unplugged the lamp, and allow
sufficient time for the bulb to cool.
CAUTION :
Clean only with a soft dry cloth – do not use solvents or
cleaners containing abrasives or ammonia.
CAUTION :
After cleaning the lamp, wipe away all moisture and properly
dry the unit before restoring power.
All manuals and user guides at all-guides.com
Troubleshooting
CHECK
Insert plug securely into wall outlet.
Check bulb for blackening/darkening at bottom of spiral where it joins the
base (an indicator of bulb life) and replace bulb.
Be sure the bulb is securely seated in the socket. Repeat the bulb
installation process.
bulb replacement or installation.
Sometimes when a new bulb is turned on for the first time the tubing will
darken, but this will fade after a few minutes.
With older bulbs, darkening of the tubing indicates end of bulb life. (This
doesn't affect operation except to reduce the amount of light available,
since the phosphor in that area has become inactive.) Bulb replacement
is recommended.
Insert plug securely into wall outlet.
Be sure the bulb is securely seated into the socket. Repeat the bulb
installation process.
bulb replacement or installation.
Connect lamp plug only to wall outlet without dimmer switch.
Care and Cleaning
To prevent risk of shock or personal injury when cleaning
SOLUTION
Always unplug lamp before performing
CAUTION:
Always unplug lamp before performing
CAUTION:
10
Publicité
