Specifications - Yamaha AX-492 Mode D'emploi

SPECIFICATIONS (AX-492)
AUDIO SECTION
Minimum RMS Output Power per Channel
8 ohms, 20 Hz to 20 kHz, 0.019% THD
...................................................85W+85W
6 ohms, 20 Hz to 20 kHz, 0.038% THD
...............................................100W+100W
Dynamic Power per Channel
(by IHF Dynamic Headroom measuring
method)
8/6/4/2 ohms ...................130/150/185/220W
DIN Standard Output Power per Channel
[Europe model only]
(4 ohms, 1 kHz, 0.7% THD) ..............120W
IEC Power [Europe model only]
(8 ohms, 1 kHz, 0.019% THD) .............100W
Power Band Width
8 ohms, 42.5W, 0.038% THD
.............................................10 Hz to 50 kHz
Damping Factor SP-A
8 ohms, 20 Hz–20 kHz ..............240 or more
Maximum Output Power (EIAJ)
[General model only]
8 ohms, 1 kHz, 10% THD .................130W
6 ohms, 1 kHz, 10% THD .................150W
Input Sensitivity/Impedance
PHONO ............................2.5 mV/47 k-ohms
CD/TUNER/TAPE/AUX ....150 mV/47 k-ohms
Maximum Input Signal (1 kHz, 0.003% THD)
PHONO.............................................115 mV
Output Level/Impedance
REC OUT .......................150 mV/0.6 k-ohms
Headphone Jack Rated Output/ Impedance
Output Level (8 ohms, 0.019% THD)
...............................................................0.3V
Impedance.....................................680 ohms
Frequency Response (20 Hz to 20 kHz)
CD/TUNER/TAPE/AUX ....................0±0.5 dB
RIAA Equalization Deviation
PHONO...........................................0±0.3 dB
Total Harmonic Distortion (20 Hz to 20 kHz)
PHONO to REC OUT (3V) ................0.003%
CD/TUNER/TAPE/AUX to SP OUT
(42.5W/8 ohms) ................................0.008%
Signal-to-Noise Ratio (IHF-A Network)
PHONO (5 mV Input Shorted) ............ 88 dB
CD (CD DIRECT AMP ON, Shorted)... 110 dB
Residual Noise (IHF-A Network)
CD (CD DIRECT AMP ON) ...................35 µV
PURE DIRECT ON ..............................90 µV
Channel Separation
CD/TUNER/TAPE/AUX (Input 5.1 k-ohms
Terminated 1 kHz/10 kHz).........65 dB/50 dB
Tone Control Characteristics
BASS: Boost/cut ................±10 dB (20 Hz)
Turnover Frequency.........(350 Hz)
TREBLE: Boost/cut...........±10 dB (20 kHz)
Turnover Frequency.....(3.5 kHz)
Continuous Loudness Control
Attenuation ............................–30 dB (1 kHz)
(Level related equalization)
Gain Tracking Error (0 to –60 dB) ............2 dB
GENERAL
Power Supply
[Europe and U.K. models] ...AC 230V, 50 Hz
[General model]
..................AC 110/120/220/240V, 60/50 Hz
Power Consumption ...............................210W
AC Outlets
[Europe and General models]
3 SWITCHED OUTLETS ..100W max. total
[U.K. model]
1 SWITCHED OUTLET ....100W max. total
Dimensions (W x H x D)
......................................435 x 151 x 391 mm
(17-1/8" x 6.0" x 15-3/8")
Weight .............................9.6 kg (21 lbs. 1 oz.)
Accessories ...........Remote control transmitter
Specifications subject to change without
notice.
Batteries
19