Publicité
To turn on a bridge surface element
(Left Front-Bridge-Left Rear)
1. Touch the Left Front element
ON/OFF. The display will flash
(The display will disappear if not
used after 10 seconds).
2. Touch SELECT to choose the
BRIDGE elements. The light above
SELECT indicates the selected
elements.
Setting
Lower light
• Left Front Element
Lower and
• Left Front Element and Bridge
Middle light
Element
Lower, Middle
• Left Front Element, Bridge
and Upper light
Element and Left Rear Element
3. Touch
level Hi or
4. Use the
power setting.
accessible. (Adjustable at any time
while the element is ON.)
5. To turn off the element after
cooking, touch ON/OFF once.
• If LEFT FRONT-BRIDGE-LEFT REAR, all
Note:
elements is operating, Left Front and Left Rear
Power Level is to be displayed together.
• If LEFT FRONT-BRIDGE-LEFT REAR, all
elements is operating, Left Rear single element
cannot be controlled singly.
To scroll through the power levels quickly press and
Note:
hold the
or
key pads until the power level
desired is reached.
All manuals and user guides at all-guides.com
SURFACE CONTROLS COOKING
Size of Element
once to turn on the power
once for Lo.
/
to choose the desired
/
is continuously
Recommended Surface Cooking
Settings
Recommended setting for the single & dual elements.
.
Setting
HIGH
(8.5 – Hi)
MEDIUM HIGH
(5.5 – 8.0)
MEDIUM
(3.5 – 5.0)
MEDIUM LOW
(2.2 – 3.0)
LOW/SIMMER
(Lo – 2.0)
- 11 -
Type of cooking
Start most foods, bring water to a
boil or pan broiling.
Continue a rapid boil, fry, or deep
fat fry.
Maintain a slow boil, thicken sauces
and gravies, or steam vegetables.
Keep foods cooking, poach, or stew
(2.8 or lower is a simmer setting).
Keep warm, melt, or simmer.
Publicité
