LENCO DIR-170 Mode D'emploi page 10

Do you want to check the WIFI network availability when powering on the device? Use the
Navigation (6) wheel to select the desired option and press the Navigation (6) wheel to confirm.
Now you can configure the wireless network.
1. Select YES if you want to continue and connect to your WIFI network using the standard
method. Press the Navigation (6) wheel to confirm. Continue reading 'network
configuration' option 1.
2. Select YES (WPS) if you would like to set up with the WPS (WIFI PROTECTED SETUP) function
of your router (please verify with your router's manual if it's available). Press the
Navigation (6) wheel to confirm. Continue reading 'network configuration' option 2.
3. Select NO and Press the Navigation (6) wheel to confirm if you want to skip the Wireless
network setup. You can configure it later in the setup menu.
10