Maintenance And Cleaning; Accessories; Technical Data - Batavia MAXX Série Mode D'emploi

Hold the keyless chuck (1a) tightly from the
1.
front. Pull or push the drill chuck ring (1b) in
the direction of the keyless chuck (1a).
2. This unlocks the keyless chuck (1a) and it
can be pulled off from the front.
3. In order to put the keyless chuck (1a) back
in position, pull the drill chuck ring (1b) in
the direction of the keyless chuck. Push the
keyless chuck (1a) on as far as it will go.

MAINTENANCE AND CLEANING

WARNING: Always disconnect from the mains
power supply, before carrying out any mainte-
nance/ cleaning of the charger. Remove the
battery before carrying out any maintenance/
cleaning of the tool.
Maintenance
There are no inner parts of the tool which need
maintenance.
Cleaning
• Keep safety devices, ventilation openings
and the motor housing as free as possible
from dirt and dust. Rub the electric power
tool with a clean cloth or blow over it with
low pressure compressed air.
• We recommend that you clean your elec-
tric power tool immediately after each use.
• Clean the electric power tool regularly with
a damp cloth and somewhat soft soap.
Do not use any cleaning or solvent materials;
these can attack the device's plastic compo-
nents. Make sure that no water can get inside
the electric power tool.

ACCESSORIES

Use only accessories with an allowable speed
matching at least the highest no-load speed of
the tool.
7062864-12V_Cordless_Drill_L-Shape-Ma-1707-13.indb 11

TECHNICAL DATA

Speed . . . . . . . . . . 0 – 350 / 1300 min
Chuck . . . . . . . . . . . . . . . 1 – 10 mm
Torque . . . . . . . . . . . . . . . . . 27 Nm
Weight . . . . . . . . . . . . . . . . . 1.09 kg
Sound Pressure Level L
pA
Uncertainty KpA . . . . . . . . . . . . . 3 dB
Sound Power Level L
WA
Uncertainty K . . . . . . . . . . . . . . 3 dB
WA
Hand Arm Vibration
(No Load) . . . . . . . . . . . . . . . 0.6 m/s
(In Metal) . . . . . . . . . . . . . . . 1.6 m/s
Uncertainty K . . . . . . . . . . . . . .1.5m/s
DISPOSAL
Do not dispose of electric power
tools with domestic refuse.
The electric power tool is shipped in
packaging to reduce transport damage. This
packaging is a raw material and as such can
either be reused or can be fed back into the
raw material cycle. The electric power tool and
its accessories are made from various materi-
als such as metals and plastics. Take defective
components to a special refuse collection
point. Ask about these at your specialist shop
or local council. The product and the user
manual may be subject to changes. Technical
data may be changed without prior notice.
Batteries
Think of the environment when disposing of
batteries. Contact your local authorities to find
out where your nearest disposal area is.
Do not dispose of batteries with domestic
refuse.
Do not dispose of by burning, risk of explosion.
English
-1
. . . . . . 63 dB(A)
. . . . . . . 74 dB(A)
2
2
2
11
28-07-17 11:16
.