Publicité
Les langues disponibles
Les langues disponibles
3. Check your adjustments
Use a spirit level to check your adjustments. Place the level diagonally on the oven rack or surface
cooktop, and check each direction for level.
FINAlIZING ThE INsTAllATIoN
• Move range close enough to the opening to plug into the receptacle.
• Slide range into position insuring that the rear left(or rear right) leg slides under the Anti-Tip bracket.
The range will sit 0" away from the back wall when properly installed.
• Carefully tip the range forward to insure that the Anti-Tip bracket engages the back brace and
prevents tip-over.
• Turn on the electrical power. Check the range for proper operation as described in the user manual.
12_ Installing the range
Installation_XAC_DG68-00109F-01_EN+CFR.indb 12
1. Check direction 1.
2. Check direction 2.
If the spirit level doesn't show level on the oven rack
or surface cooktop, adjust the leveling legs with a
wrench.
Anti-Tip bracket
Leveling leg
DG68-00109F-01
2012-02-21
6:48:54
Publicité
