Publicité
Les langues disponibles
Les langues disponibles
installing the range
INsTAllING ThE ANTI-TIP DEVICE
WARNING
WARNING
installing the Anti-Tip device packed with the appliance.
•
Refer to the installation instructions supplied with the bracket.
•
Unless properly installed, the range could be tipped by stepping or sitting on the door. Injury may
result from spilled hot liquids or from the range itself.
*approximately
21/32"(16.5mm)
Screw must enter wood or
1. Locate the bracket using the template
The Anti-Tip bracket is packaged with a template. The instructions include information necessary to
complete the installation. Read and follow the instructions on the sheet (template) for range installation.
2. Level the range
Level the range by adjusting the leveling legs with a wrench.
Lower range
Installation_XAC_DG68-00109F-01_EN+CFR.indb 11
To reduce the risk of tipping, the appliance must be secured by properly
Anti-Tip
bracket
concrete
Raise range
Leveling leg
*NOTE: To install Anti-Tip bracket,
release the leveling leg. A minimum
clearance of 21/32"(16.5mm) is required
between the range bottom and the
kitchen fl oor.
Installing the range _11
2012-02-21
6:48:54
Publicité
