AEG A52000GNW0 Notice D'utilisation page 33

Rear spacers
Inside the appliance you find two spacers which
must be fitted as shown in the figure.
Slacken the screws and insert the spacer under
the screw head, then retighten the screws.
Door reversibility
WARNING!
Before carrying out any operations, remove the plug from the power socket.
To change the opening direction of the door, do these steps:
1. Remove the clip-in ventilation grille (D).
Remove the bottom hinge (E) by un-
screwing the three fixing screws and
keep the hinge gasket (X).
Installation
X
N
Y
M
E
Z
33
F
D
F