Télécharger Imprimer la page

Ego Power+ ZT4200L Mode D'emploi page 60

Publicité

Les langues disponibles

Les langues disponibles

k. Once the machine is in the bed of the truck/trailer, secure it in place using the tie-down straps. One strap to secure
the front of the machine and two remaining strap to secure the hitch.
l. Manually turn the front wheels so they are perpendicular to the direction of the machine.
m. Engage the parking brake.
To unload the machine from a truck or trailer
a. Release the tie-down straps and disengage the parking brake.
b. Manually turn the front wheels so they are parallel to the direction of the machine.
c. Unfold the ramps and align the top of each ramp with the center of the corresponding front wheel.
d. Use the measuring tape to make sure that the bottom ends of the ramps are parallel to the top ends.
e. Connect one end of the ratchet strap to the safety chain hook on the truck/trailer. Connect the other end to the hinge
(or middle) of the ramp. Repeat this step with the other ramp.
f. Tighten the straps and make sure the ramps are secure and there's no movement when you tug on the straps.
WARNING: Always make sure the ramps are properly secured. Improperly secured ramps may cause the machine
to fall down, causing serious personal injury and damage.
g. Use the measuring tape to once again verify that the ramps are parallel.
h. Each person should place one hand on the front frame and the other hand on the plastic housing (near the cup
holder on the left and the control panel on the right) and carefully lead the machine down the ramp. NEVER use the
lap bars or any part of the seat to push/support the machine.
STORAGE
The following steps should be taken in order to prepare the lawn mower for storage.
Remove the battery packs from the mower and store the batteries in a cool, dry location.
Remove the safety key from the mower.
Thoroughly clean the mower. See section "CLEANING THE MACHINE" in this manual for reference.
Inspect the mower for worn or danaged parts and tighten any nuts or screws that may have become loose.
Store the mower in a dry, clean location. Do not store it next to corrosive materials, such as fertilizer or rock salt.
Store the mower in a covered, enclosed space, out of the reach of children.
NOTICE: Plastic coverings trap moisture around the mower, which causes rust and corrosion.
60
56-VOLT LITHIUM-ION ELECTRIC ZERO TURN MOWER — ZT4200L/ZT4200L-FC

Publicité

loading

Ce manuel est également adapté pour:

Zt4200l-fc