Roller Shutter/Venetian Blind, Drive Controller/Group Controller, Running Time; (Selection Of Roller Shutter/Venetian Blind, Selection Of The Drive Controller/Group Controller, Running Time Of The Roller Shutter/Venetian Blind) - Selve i-Timer Plus Notice D'utilisation

Programming
FUNCTION
(only when the operating device is disconnected, only for
qualified electricians)
ROLLER SHUTTER/VENETIAN BLIND, DRIVE CONTROLLER/
GROUP CONTROLLER, RUNNING TIME
(Selection of roller shutter/venetian blind, selection of the drive
controller/group controller, running time of the roller shutter/venetian
blind)
FUNCTION
OK
ROLLER SHUTTER/
VENETIAN BLIND
+/-
1. Press the MENU button.
2. To select the FUNCTION menu, press the + button until
FUNCTION appears.
3. Confirm by pressing OK. ROLLER SHUTTER/VENETIAN
BLIND will appear.
4. You can select either roller shutter or venetian blind using the
+/- button.
5. Confirm by pressing OK.
DRIVE CONROL DEVICE/GROUP CONTROLLER will appear.
6. You can select the control device required using the +/- button
(DRIVE CONROL DEVICE/GROUP CONTROLLER).
7. Confirm by pressing OK. RUNNING TIME will appear.
8. You can set the required running time using the +/- button
(default setting: 120 seconds).
9. Confirm by pressing OK.
10. The RUNNING TIME function has now been set.
Please read on for further programming options using the
FUNCTION menu.
OK
DRIVE CONTROLLER/
GROUP CONTROLLER
+/-
OK
RUNNING TIME
+/-
75
GB
OK
continuing
next page