Explanation Of Functions/Terms Used; General - Selve i-Timer Plus Notice D'utilisation

Explanation of functions/terms used

Explanation of functions/terms used

General

Manual/automatic sliding switch
In the 'Man' sliding switch setting, only manual command controls
are carried out (e. g.: UP, STOP, DOWN by pressing the relevant
buttons).
In the 'Auto' sliding switch setting, automatic command controls
are carried out (e. g. shade function, twilight function, time, astro
function ...).
Alarm signal control light
When the alarm signal control light is illuminated, this indicates an
alarm signal. If there is a permanent switching signal at the group
or individual control inputs for more than 5 seconds, it is an alarm
signal.
Group control
Group control is the control of several drives at the same time.
Operating mode
You see the time in the display.
OK button
When the OK button is pressed, the currently displayed values are
saved.
+/- buttons
The following operations are possible using the + and - buttons:
• Menu
• Auto mode
• + button
• - button
• + button and
• - button and
➞ change value
➞ request information
➞ next automatic switching time ▲
➞ next automatic switching time ▼
OK button ➞ astro time ▲
OK button ➞ astro time ▼
51
GB