Kohler K-176 Mode D'emploi page 4

4-1/2"
(11.4 cm)
3/16" (5 mm)
Min –
2" (5.1 cm)
Max Depth
8-Pin Interface Cable
Roughing-In
Before You Begin
Observe all local plumbing, building, and electrical codes.
Read these instructions and determine all required components along with their installation
locations before beginning this installation.
A licensed electrician should install a 15 A 120 V GFCI electrical outlet, within the stud framing, in
close proximity to the electronic valve and media module. The interface is powered through the
connection with the media module.
Install the valve and media module prior to installing the interface.
Kohler Co. reserves the right to make revisions in the design of our products without notice, as
specified in the Price Book.
1093343-2-B
8-1/2" (21.6 cm)
7-5/8"
(19.4 cm)
30' (9.14 m)
Clamp Arm
3-5/8"
(9.2 cm)
3-5/8" (9.2 cm) –
4-5/8" (11.7 cm)
Wall Cavity
Depth
3-11/16"
(9.4 cm)
4
1/2" (1.3 cm)
Min Clamp
Arm Clearance
7-11/16"
(19.5 cm)
1/4" (6 mm) Min
Interface Lip
Clearance
Cutout Detail
Cutout
Kohler Co.