Publicité
Les langues disponibles
Les langues disponibles
Troubleshooting (cont.)
Media Module Troubleshooting Table
Symptoms
6.
Experiences are not
functioning.
Remote Control Troubleshooting Table
Symptoms
1.
Intermittent or erratic
operation.
2.
LED on remote does not
blink or constantly blinks.
3.
One or more buttons on
remote do not function
and LED does not light
up.
4.
One or more buttons on
remote do not function
but LED lights up.
1093343-2-B
Probable Cause
A. SD card is dislodged.
Probable Cause
A. Frequency/channel interference.
A. Batteries are low.
A. Batteries are low.
B. Remote program lost.
C. Remote is damaged.
A. Digital interface is
malfunctioning.
Recommended Action
A. Contact your Kohler Co.
Authorized Service Representative.
Recommended Action
A. Set RFID, PANID, and channel by
following screen prompts on the
digital interface for the remote.
Then re-sync the remote as
instructed in the Bath Homeowners
Guide.
A. Replace batteries (2 AA).
A. Replace batteries (2 AA).
B. Re-sync the remote to the interface.
C. Replace remote.
A. Digital interface may need to be
replaced. Contact your Kohler Co.
Authorized Representative.
20
Kohler Co.
Publicité
