ARVA EVO5 Mode D'emploi page 5

To turn on the device, push the
OFF/SEND/SEARCH selector (lo-
cated on the upper right-hand
side of the device) down until
the lock button mechanically
locks it into place (the white ar-
row should point to "SEND").
The selector is properly locked when, in transmit mode, the
lock button pops out and you hear it click into place and you
cannot push it down any further.
When the device turns on, it automatically checks that all
main functions are working properly. Verify that the au-
to-test runs correctly and pay close attention to any error
messages that display when turning on your device.
The device then displays the software version installed and
remaining battery life. We recommend that you replace the
battery as soon as it drops below 50%. Holding down the
marking button in transmit mode will allow you to check bat-
tery life left at any time.
EN
5