Publicité
Les langues disponibles
Les langues disponibles
• If the distance displayed alternates
between 0.5m and 1.5m, and you are posi-
tioned 1m from the device being checked,
your device will emit a standard search
beep indicating that the transmit power
meets standard requirements.
• If the distance displayed seems strange,
this means that the transmit power might
be faulty and that the device should be
sent to customer service for further in-
spection and maintenance.
• If the beacons you are testing are too
close to one another, two horizontal
lines and two victims will be displayed.
The persons to be tested must be at
least 3m apart.
Make sure that the group leader's device is also checked
once the group check is finished. Push on the marking but-
ton to switch to transmit mode.
10
3.2/ RESCUE
3.2.1/ STEP 1: SIGNAL SEARCH
To search for a signal, move through the avalanche debris
using one of the two techniques illustrated in the diagrams
below.
It is important to point your transceiver in the direction of
the avalanche, parallel to the slope. Listen carefully for the
first signs of a signal while also paying attention to any
visual clues (poles, skis, and clothing). As soon as you re-
ceive a signal, a victim icon appears on the screen.
Publicité
