ARVA EVO5 Mode D'emploi page 12

3.2.3/ STEP 3: FINE SEARCH
When the screen indicates that you are "3 meters" from a
burial, your device will no longer indicate a direction. At this
point you need two conduct a fine search using a "cross
pattern".
Example of fine
search technique
1. Position your device near snow level.
12
1st probing
point
2. Move your device in a cross pattern to locate the point
where the distance reading is the lowest.
Marking function: When you are less than
3 meters from the burial(s), a marking
icon blinks in the upper right-hand corner
of the screen. Press the marking button
to mark the victim. The device will start
searching for the next victim without any
already marked burial(s) interfering.
In a multi-burial situation, as soon as
you mark a victim, step 1 meter away to prompt the device
to more quickly start searching for the next buried victim.
When you mark a victim, a flag appears next to that victim's
icon.
If "no" is displayed, marking a victim is
impossible. This is due to one of the fol-
lowing reasons:
-The victim is not synchronised yet.
-The victim you are trying to mark, is more
than 3m away.
-The victim's transceiver is emitting out-
side the regulatory transmission band.