Télécharger Imprimer la page

Andis LCL Mode D'emploi page 2

Masquer les pouces Voir aussi pour LCL:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 5
E N G L I S H
Please read the following instructions before using your new Andis clipper. Give it the care
that a fine precision built instrument deserves and it will give you years of service.
IMPORTANT SAFEGUARDS
When using an electrical appliance, basic precautions
should always be followed, including the following: Read all
instructions before using the Andis clipper.
DANGER:
To reduce the risk of electric shock:
1. Do not reach for an appliance that has fallen into water.
Unplug immediately.
2. Do not use while bathing or in a shower.
3. Do not place or store appliance where it can fall or be pulled
into a tub or sink. Do not place in or drop into water or other
liquid.
4. Except when charging, always unplug this appliance after use.
5. Unplug this appliance before cleaning, removing or
assembling parts.
WARNING:
To reduce the risk of burns, fire, electric
shock, or injury to persons:
1. An appliance should never be left unattended when plugged
in.
2. This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
3. Children shall not play with the appliance.
4. Use this appliance only for its intended use as described in
this manual. Do not use attachments not recommended by
Andis.
5. Never operate this appliance if it has a damaged cord or
plug, if it is not working properly, if it has been dropped or
damaged, or dropped into water. Return the appliance to an
Andis Authorized Service Station for examination and repair.
6. Keep the cord away from heated surfaces.
7. Never drop or insert any object into any opening.
8. Do not use outdoors or operate where aerosol (spray)
products are being used or where oxygen is being
administered.
2
All manuals and user guides at all-guides.com
9. Do not use this appliance with a damaged comb or broken
blade, as injury to the skin may occur.
10. To disconnect turn control to OFF then remove plug from
outlet.
11. Plug adapter cord directly into an AC outlet. Do not use an
extension cord.
12. Use of an adapter cord or plug not sold by Andis may result
in risk of fire, electric shock, or injury to person.
13. Do not disassemble adapter cord or plugs. Incorrect
reassembly may result in a risk of electric shock or fire.
When repair is required, send or take to an Andis Authorized
Service Station.
14. The battery in this clipper is designed to provide maximum
trouble-free life. However, like all batteries, it will eventually
wear out. Do not attempt to replace battery. When repair or
replacement is required, send or take to an Andis Authorized
Service Station.
15. Batteries can be harmful to the environment if disposed of
improperly. Many communities offer recycling or battery
collection. Contact your local government about disposal
practices in your area.
16. WARNING: Never touch both terminals on clipper with
metal objects and/or body parts, as short circuit may
result. Keep away from children. Failure to comply with
these warnings could result in fire or serious injury.
17. Keep the appliance dry.
SAVE THESE INSTRUCTIONS
OPERATING INSTRUCTIONS
FOR MODELS WITH DETACHABLE PLUGS
(Plugs may vary by model)
UNIVERSAL AC/DC POWER ADAPTER
1. Remove the wall adapter and clipper from the carton.
2. The clipper comes standard with a universal AC voltage wall adapter and interchangeable plugs
(Figures A-E).
3. To attach the desired plug to the wall adapter, align the slots on the plug to the ribs on the wall
adapter and slide into place. The plug will "click" into place when properly attached. To remove,
locate the button marked "push" on the wall adapter. Press the button and slide the plug from
the wall adapter. The plugs for the various countries all attach and remove using the same
method (Figure F).
4. Plug the adapter cord directly into the receptacle on the bottom of the clipper (Figure G) and
then insert the transformer into an AC outlet.
FOR MODELS WITH FIXED PLUG (UK)
The clipper comes standard with a universal AC voltage wall adapter with a UK plug. Do not
attempt to remove the plug from the cord or plug into any outlet other than a UK outlet.
3

Publicité

loading