HP LaserJet 8150 Guide De Mise En Marche page 23

Step 10 Install or Change the Control Panel
Overlay (Optional)
1
2
3
4
5
EN
All manuals and user guides at all-guides.com
Install or Change the Control Panel Overlay (Optional)
To change the overlay to a language
other than English:
1 Locate the overlay you wish to install
and remove it from its bag.
Note
Make certain the power switch is off.
2 Gently lift up on each side of the
installed overlay.
3 Insert your thumbnail or a thin, rigid
object in front of the overlay and
press toward the back of the printer.
Lift to remove.
4 To install the new overlay, position it
over the control panel, rear-side first.
5 Snap the overlay firmly onto the
control panel. Ensure that the
overlay is flat.
21