Philips Intellicare GC8030 Mode D'emploi page 6

ENGLISH
6
All manuals and user guides at all-guides.com
Introduction
Thank you for buying the Intellicare, the new intelligent steam-ironing
system from Philips.
The iron offers non-stop ironing and also has a detachable water tank
that can be refilled at any moment.
The iron has a constant high steam output, which is a unique feature
for steam-ironing systems with unlimited autonomy.This gives you a
constant and fast ironing result.
General description
A
Shot-of-Steam button (GC8030 only)
B
Temperature dial
C
Steam activator
D
Temperature pilot light
E
Supply hose
F
Soleplate
G
Iron stand
H
Power on/off switch with pilot light
I
'Water tank refill' indicator light (GC8030/GC7030 only)
J
Steam tank pilot light (GC8030/GC7030 only)
K
Mains cord
L
Steam tank
M
Calc-Clean rinsing cap & plug
N
Cord storage facility for mains cord & supply hose
(GC8030/GC7030 only)
O
Filling opening
P
Detachable water tank
Q
Water tank release lever
R
Transport handgrip
S
Cup
Important
Read these instructions for use carefully before using the appliance and
save them for future reference.
Check if the voltage indicated on the bottom of the steam tank
corresponds to the local mains voltage before you connect the
appliance.
Only connect the appliance to an earthed wall socket.
Do not use the appliance if the plug, the cord, the hose or the
appliance itself is damaged.
Regularly check if the mains cord and the supply hose are still
undamaged and safe.
If the mains cord is damaged, it must be replaced by Philips, a
service centre authorised by Philips or similarly qualified persons
in order to avoid a hazard.