Replacing The Tank Filter; Cleaning The Motor Cover - eder 1800 Mode D'emploi

Cleaning and maintenance
86 Capstan winch 1800, 1200, 400
To ensure the faultless function of the capstan winch and maximum
efficiency, we recommend using the lubricant "Brunox Lub & Cor".
›
Lubricate all moving parts on the carburettor and rope locking
mechanism with the recommended lubricant.
If excess lubricant leaks out:
›
Wipe up the leaked lubricant.

Replacing the tank filter

The tank filter prevents solid particles from entering the petrol mixture.
The tank filter is located in the tank. Check the condition of the tank
filter monthly.
To replace the tank filter:
›
Unscrew the tank cap.
›
Carefully pull the tank filter out with a wire hook.
›
If the tank filter is dirty, change it.
›
Screw the tank cap tight again.

Cleaning the motor cover

Damage to the motor!
If the motor cover is not cleaned correctly, this can result in damage
to the motor.
›
Do not clean the motor cover with fluid cleaning products or oiled
paper.
›
Clean the motor cover with a brush or compressed air.
ATTENTION
900012 Rev. 01 | 09.2017