Cleaning And Maintenance - eder 1800 Mode D'emploi

Cleaning and maintenance

84 Capstan winch 1800, 1200, 400
Cleaning and maintenance
Risk of injury when working on the capstan winch whilst the
transmission is running!
The capstan drum can start to move when the transmission is
running and cause serious injuries.
›
Switch off the motor before performing all work on the capstan
winch, and secure the capstan winch before switching on again.
Risk of burns due to hot surfaces!
Combustion motors generate high heat. Contact with hot surfaces
results in serious burns.
›
Leave the motor to cool down.
›
Wear protective gloves during all maintenance, servicing and
cleaning work.
Voided guarantee!
Improper use of the machine, unauthorised repairs and maintenance
voids all guarantee claims.
›
Only perform repairs and maintenance work as specified in this
manual. All repairs and maintenance work that are not listed
in the operating manual must be carried out by an authorised
workshop.
›
Contact your dealer or an authorised repair workshop.
Only use technically faultless accessories and original spare
i
parts. You can obtain further information on the accessories
and spare parts on our website www.grube.de. Consult your
dealer if necessary.
You must perform the following work if necessary:
›
Check capstan winch for external damage and clean,
›
Lubricate all moving parts if necessary,
›
Check tank filter and replace,
›
Clean the motor cover,
WARNING
ATTENTION
900012 Rev. 01 | 09.2017