Bosch C-IR 20 Notice D'installation Et D'utilisation page 44

Operation
The minimum program step is 15 minutes. It is necessary to configure several
periods. The first period begins at 00:00.
▶ Choose the end time period with the + and - keys and the temperature to be
followed during this period.
▶ Press the Next button to continue the program. The next period will start at the
end of the last period.
▶ For all periods defined, an end period needs to be defined as well as
temperature. The last period stops at 24:00. Then, press the Next button.
▶ Then, define another program for Tuesday by pressing the EDIT button. It is
possible to copy the program set for Mon by pressing Copy to button.
b) Set weekday/weekend
One program needs to be defined for the weekdays (Mon to Fri) and one for the
weekend (Sat and Sun).
Use the same process as explained above to customize the program.
c) Set all days at once
One program needs to be defined. It will be the same for every day of the week.
Use the same process as explained above to customize the program.
How to choose a program
▶ Press the Mode button, the
▶ Press Select Program and select between four built-in programs and three user
programs.
▶ Press See Next to scroll through the different programs and Select to confirm
the selection.
▶ The current program can be viewed by pressing View Current Program.
▶ If you return to the main screen, press on the
the screen to see the current program.
Timer mode
The Timer mode allows to set a temperature and duration for a period of up to 5
hours.
This function can be used to override the program for short periods (reception, etc.).
The temperature and duration can be adjusted (default value is 22°C).
44
icon and then Edit Program button.
button on the bottom right of
C-IR 20 – 6721851970 (2023/10)