Hoover TOTAL HOME PET Mode D'emploi page 7

User Controls
Power the unit ON/OFF.*
1
Quick Release Cleaning Wand.*
Press the 'Wand Release' and pull out
of the vacuum for above floor cleaning.
3
*See page 8 for location of features.
All manuals and user guides at all-guides.com
Brush Roll ON/OFF Pedal.*
ON: Carpets
OFF: Hard Floors
To turn the Brush Roll ON/
OFF, step on the pedal.
2
4 Level Hight Adjustment Lever*
To adjust the height setting, turn the lever to the desired height setting.
For maximum cleaning performance, the following carpet height settings
are recommended:
-Hard floor setting: use for hard floors only
-Low and Medium setting: adjust depending on carpet type
4
-High carpet setting: for use on high pile carpets to ease pushing effort
Pedal is inactive when the cleaner is in the upright position.
• IMPORTANT•
If the vacuum is difficult to push, rotate the lever to the next higher setting.
IMPORTANT
CAUTION
Brush roll should be in OFF position for
cleaning of high pile carpet deeper than 1".
7