Publicité
Les langues disponibles
Les langues disponibles
Step 9: Using Cable Management
The EM-PLA includes a cable management system where cable can
be routed along the length of the arm assembly.
Route the display cable along the entrance of the cable
management slot.(Fig.10)
Note:
For optimal performance, route the AC power
cable separately form the signal cables.
With all cables in place, pull the display in and out to be certain that the arm assembly
moves freely, without stretching or damaging the cables.
Step 10: Adjusting the Display
The EM-PLA provides a wide range of adjustment possibilities to suit your environment.
Roll Control
Horizontal leveling of the flat panel display.
-
Grasp the edge of the display and roll it up or down into a level position (Fig.13).
Tilt Adjustment - Raising or lowering the screen to improve viewing angle.
Grasp the upper and lower edges of the display, and then turn it to the desired tilt angle (Fig.14).
To lock the tilt angle, tighten the tilt knob (Fig.15) securely.
NOTE: For heavier displays, never fully release the tilt knob without fully
supporting the display.
All manuals and user guides at all-guides.com
Fig.13
Fig.14
Fig.15
cable management
Fig.9
cable
9
NB012010
Publicité
