Publicité
Les langues disponibles
Les langues disponibles
The spacers may be used individually,or may be snapped together to create one large
stacked spacer.The spacers have been designed to snap directly into the mounting rail for
ease in handling, and also include two different mounting holes to manage the various screw
sizes.
Generally,the 5/8" (L) is used on displays with slightly curved backs and /or recessed
mounting lands. The 3/4" spacer (M) is used on displays with curved backs, and stacked
spacers(L&M) will be used on displays with deeply curved backs and/or protruding accessories.
Step 8: Attach the Display
Place the adapter down on the back of the flat panel display.Align the
left mounting rail with the mounting holes on the back of the display panel.
Center the rail vertically over the back of the display,and secure using
the selected mounting screws (A-H), square washers (O) and any
required spacers (L&M) (Fig.8).
Note:
Use the segmented mounting slots on the rails as a
means for vertically centering the adapter.
Now slide the opposite mounting rail into position,align it with the mounting holes, and secure with the
mounting hardware.
DO NOT over tighten the mounting screws, or the display may be damaged.
NEVER use a power driver to tighten the mounting screws.
With the help of an assistant, carefully lift the display and attach it to the mount head.
Tighten the screws (Fig.8.1).
All manuals and user guides at all-guides.com
IMPORTANT
mount head
M8*15mm screw bolt
8.2*1.5*16mm metal washer
Fig.8.1
Fig.8
8
NB012010
Publicité
