Checking The Remaining Time Or The Playing Position; On The Recorder - Sony MZ-R900 Mode D'emploi

Checking the remaining
time or the playing
position
You can check the track name, disc name,
etc. during playback.

On the recorder

1
While the recorder is playing, press
the jog lever (L), flip the lever until
"DISPLAY" flashes in the display,
and then press the lever again.
2
Flip the jog lever (L) until the
information you want flashes in the
display.
Each time you flip the lever, the
display changes as follows.
LapTime (The elapsed time.)
r
1 Remain (The remaining time of
the current track.)
r
AllRemain (The remaining time
after the current location.)
r
RecDate (Recording date and
time.)
3
Press the jog lever (L).
The display changes as follows.
40
-GB
Jog lever (L)
Display window on the recorder
A
A
Track number
1)
Track number
Number of tracks
after the current
2)
track
Recorded date 3)
1)
If the track is labeled, "
display followed by the track name.
2)
If the disc is labeled, "
display followed by the disc name.
3)
Appears only when the clock is set.
z
The display that appears on the remote control
is different from the ones on the recorder. See
"On the remote control" (page 41) to check the
display that appears on the remote control.
B
B
Elapsed time
Remaining time of
the current track
Remaining time
after the current
location.
Recorded time 3)
" appears in the
" appears in the